Sidechain Compression Explained (With Remix Examples)

If you have ever wondered why a dance track seems to "breathe" with the kick drum, or how a radio host's voice cuts through the music without anyone riding the fader, the answer is usually sidechain compression. It is one of the most useful tools a remixer can learn. It solves a real mixing problem (two sounds fighting for the same space), and when you push it harder it becomes a creative effect that defines whole genres.

This guide explains what sidechain compression is, how the routing works, which settings matter, and how to set it up in Ableton Live, Logic Pro and FL Studio. It finishes with practical remix examples, common mistakes and a short FAQ. You don't need any extra plugins: the stock compressor in every major DAW has a sidechain input.

What is sidechain compression?

A normal compressor listens to the same audio it is processing. When that audio gets louder than the threshold, the compressor turns it down. Sidechain compression splits those two jobs. The compressor still processes one track (say, your bass), but it listens to a different track (say, your kick drum) to decide when to turn the bass down.

So every time the kick hits, the bass dips for a moment and then comes back up. The kick gets a clear slot in the low end, and the bass still fills the gaps between hits. The track used as the trigger is called the sidechain source or key input. Its audio is only used as a control signal. It does not pass through the compressor and is not added to the processed track. Apple's Logic Pro guide and Ableton's Live manual both make this point: the sidechain signal is a trigger only and is never heard through the compressor.

You will also hear the effect called ducking, because the processed track "ducks" out of the way of the trigger. Ducking is usually the subtle, corrective version. Pumping is the obvious, rhythmic version you hear on many house, EDM and future bass records.

Why remixers use sidechain compression

  • Kick and bass clarity. Kick and bass share the same low frequencies. Ducking the bass under each kick lets both read clearly without cutting EQ from either one.
  • Vocals over a dense track. A gentle duck on pads, guitars or a music bus, keyed from the lead vocal, opens space in the midrange while the singer is singing and gives it back between phrases.
  • The pumping groove. Heavy sidechain on pads, chords or even the whole music bus creates the rhythmic swell that drives a lot of dance music.
  • Making samples sit. When you drop a sampled loop or an extracted stem into your remix, sidechaining it to your new drums helps glue the old material to your new groove.
  • Voiceovers and podcasts. Background music that ducks under speech is the same technique, just slower and gentler.

How the signal routing works

Every sidechain setup has three parts:

  1. The target: the track you want to turn down (bass, pad, music bus). The compressor goes here, as an insert effect.
  2. The trigger: the track that decides when the target ducks (kick, vocal, a ghost trigger). You select it in the compressor's sidechain menu or send it to the compressor's sidechain input.
  3. The compressor settings: threshold, ratio, attack and release decide how much and how long the target ducks.

A useful trick is the ghost trigger: a muted kick (or a short click sample) on its own track, programmed on every beat. Use it as the sidechain source instead of your real kick. The pump then stays steady even in breakdowns where the audible kick drops out, and you can program the trigger pattern independently of the drums. In FL Studio, the mixer's "Sidechain to this track only" option sends a source to the sidechain without sending it to the master, which is a handy way to build a silent trigger.

The settings that matter

Threshold

Threshold sets how loud the trigger must be before the compressor reacts. With a sidechain, you are adjusting it against the trigger's level, not the target's. Pull the threshold down until you see gain reduction on every kick hit. If some hits don't trigger, lower it further or raise the sidechain gain.

Ratio

Ratio sets how hard the target is pushed down once the trigger passes the threshold. Apple's Logic Pro guide gives the standard definition: at 4:1, a 4 dB rise in input above the threshold gives only a 1 dB rise in output. For subtle kick/bass ducking, around 2:1 to 4:1 with a few dB of gain reduction is a reasonable start. For an obvious pump, use a high ratio (8:1 or more) and aim for deeper gain reduction.

Attack

Attack is how fast the compressor clamps down after the trigger arrives. For kick-and-bass ducking you usually want it fast (around 0 to 5 ms), so the bass is already out of the way when the kick's transient hits. A slightly slower attack lets a little of the target's front edge through, which can sound more natural on pads or vocals.

Release

Release is how long the target takes to come back up. It shapes the groove more than any other control. Too short and the duck sounds like a click or adds distortion to the bass. Too long and the target never fully recovers before the next kick, so the track loses level and energy. A practical starting point is to time the release to the space between kicks. One beat lasts 60,000 / BPM milliseconds, so at 120 BPM a quarter note is 500 ms and at 128 BPM it is about 469 ms. Start with a release somewhat shorter than that, then adjust by ear until the target swells back just before the next hit.

Sidechain filter (EQ) and listen

Most stock compressors let you filter the trigger signal. Ableton's Compressor has a sidechain EQ section, and Logic's Compressor offers LP, BP, HP, ParEQ and HS filter modes for the side chain. This only changes what the compressor hears, not what you hear. The classic use: if you only have a full drum loop, put a low-pass filter on the sidechain so the compressor reacts to the kick and ignores the hats and snare. Ableton's manual describes exactly this technique for ducking with a mixed drum track. Both DAWs also have a listen button that lets you audition the filtered trigger while you tune it.

Makeup gain

Leave makeup gain alone at first. With a sidechain, the target is only turned down while the trigger plays, so automatic makeup can make the track louder between hits than it was before. Ableton's Compressor disables auto makeup when an external sidechain is active for this reason.

Step-by-step: sidechain a bass to the kick

This is the core setup. Once it works, every other example is a variation.

  1. Balance the kick and bass without any compression first, so you know what problem you are solving.
  2. Insert your DAW's stock compressor on the bass track.
  3. Open its sidechain section and choose the kick track (or a ghost trigger) as the source.
  4. Set a fast attack, a medium ratio (about 4:1) and a release roughly in time with the beat.
  5. Lower the threshold until the gain reduction meter moves on every kick, aiming for a few dB of reduction.
  6. Loop a section with both parts playing. Toggle the compressor on and off and listen for the kick getting clearer without the bass sounding choppy.
  7. Adjust the release first, then the depth (threshold and ratio), and stop as soon as the low end sounds clean.

Setting it up in your DAW

Ableton Live

Put a Compressor on the target track and unfold its sidechain section with the toggle in the device's title bar. Enable Sidechain and pick the trigger track from the routing choosers below it. The Gain knob sets the trigger level, and the Dry/Wet knob blends the external trigger with the track's own signal (at 100% the compressor listens only to the sidechain source). Turn on the EQ section to filter the trigger, and use the headphone button to hear the trigger alone while you adjust it.

Logic Pro

Insert Compressor on the channel strip you want to duck. Click the Side Chain button in the Compressor window, then choose the trigger channel strip from the Side Chain pop-up menu in the plug-in header. Choose Max or Sum detection, then adjust threshold, ratio, attack and release. The side chain filter and its Listen button work just like Ableton's sidechain EQ.

FL Studio

Fruity Limiter includes a compressor with a sidechain input. Select the mixer track that carries the trigger, right-click the send switch on the mixer track that holds Fruity Limiter, and choose Sidechain to this track. Then, on Fruity Limiter's COMP tab, right-click the SIDECHAIN selector and choose the trigger track. Lower THRESH below the input peaks and raise RATIO to make the compression engage. Image-Line's manual notes that the CURVE control, at longer release times, is useful for tuning the "bounce-back" feel of a pumping effect.

Volume-shaper alternatives

Some producers skip the compressor and draw the duck as a volume envelope (with an LFO tool, volume automation or a dedicated ducking plugin). This gives the exact same curve on every beat, with no dependence on trigger level, and works well for a precise pump. A real sidechain compressor reacts to what the trigger actually plays, which feels more natural when the drums have fills, ghost notes or varying velocities. Both are valid. Choose whichever gives you the groove you want.

Remix examples

1. Classic house pump on chords

Take the original song's chords or a pad you've added, and sidechain them to a ghost four-on-the-floor trigger. Use a high ratio, a fast attack and a release that lets the chords swell back up just before the next beat. Push the gain reduction until the pump is clearly audible. This is the most recognisable sidechain sound, and it instantly makes a ballad's chords feel like a dance record.

2. Ducking a sampled loop under new drums

Remixers often drop in a loop from the original that already has its own low end. Instead of cutting all of its bass with EQ, sidechain it to your new kick with a moderate setting. The original's character stays, but your new kick lands cleanly. If the loop came from a stem separation tool, check our guide to stem separation for getting cleaner stems to start with.

3. Making room for the acapella

In a vocal remix, the lead vocal from the original is the star. Put a compressor on your music bus (or just the busiest synths) and key it from the vocal. Use a low ratio, a medium attack and a slower release so you get a dB or two of gentle dip while the singer is singing. Nobody should hear it as an effect; the vocal just feels more present. Pair it with the other steps in our guide on how to mix vocals before you reach for more vocal EQ.

4. Sidechained reverb and delay

Put a compressor after the reverb or delay on a vocal return and key it from the dry vocal. The tail ducks while the singer is singing and blooms in the gaps. You get a big, wide space without washing out the words. This works on synth leads and plucks too.

5. Rhythmic gating for a breakdown

A variation on the same idea: key a noise gate (instead of a compressor) on a sustained pad from a hi-hat or a programmed trigger pattern. The pad only plays when the trigger is present, chopping it into a rhythm. It's a quick way to make a static pad feel like a sequenced part in a breakdown.

Common mistakes

  • Too much on everything. If every element pumps, nothing stands out and the whole track loses punch. Decide which parts need to move.
  • Release too short. Very short releases on bass can add audible distortion or clicks. Lengthen it until the duck sounds smooth.
  • Release too long. The target never fully recovers, so it loses level and the groove feels sluggish.
  • Triggering from a full drum loop without filtering. The snare and hats trigger the duck too. Use the sidechain low-pass filter or a ghost kick.
  • Judging in solo. A sidechained bass can sound odd on its own. Always judge it with the kick and the rest of the mix playing.
  • Fixing a mix problem with the master limiter instead. Kick/bass conflicts are best solved in the mix. Sort them out with sidechain and level before you get to the mastering stage covered in our guide to how to master a song.

Frequently asked questions

What does sidechain compression do? It turns one track down based on the level of another track. The classic example is a bass that dips whenever the kick drum plays, so both are clear.

Is sidechain compression the same as ducking? Ducking is the result: one sound getting out of the way of another. Sidechain compression is the most common way to do it. Pumping is a heavier, deliberately audible version.

Do I need a special plugin? No. Ableton Live's Compressor, Logic Pro's Compressor and FL Studio's Fruity Limiter all have sidechain inputs. Volume-shaper plugins are an alternative, not a requirement.

What release time should I use? Start by timing it to the gap between kicks (one beat is 60,000 / BPM ms), then shorten it until the target recovers just before the next hit. Trust your ears over the number.

Should I sidechain my whole mix? For a deliberate pump on a dance record, sidechaining a music bus (everything except drums and vocal) is common. For most other music, keep it to the parts that actually clash.

Conclusion

Sidechain compression comes down to one idea: let one track tell another when to get out of the way. Start with the corrective version (bass ducking under the kick), learn how release shapes the groove, and only then push it into an obvious pump where the song calls for it. Used with intention, it is one of the quickest ways to make a remix feel clear, tight and moving.

Sources

Plugin layouts change between versions; check your DAW's current manual if a control has moved.