How to Master a Song: A Step-by-Step Guide for Home Producers
Mastering is the last stage of music production. Mixing shapes the individual tracks in a song; mastering works on the finished stereo mix as a whole, with small EQ, dynamics, stereo and level adjustments, so the song sounds balanced, competitive in loudness and consistent on everything from earbuds to club speakers.
You do not need a dedicated mastering studio to get a good result at home. You need a well-prepared mix, a reference track, a few stock plug-ins and a clear order of work. This guide walks through that order step by step, explains how loud a master should be for streaming, and shows how the same steps map onto FL Studio, GarageBand and Ableton Live.
Mixing vs mastering: what changes at this stage
During mixing you can still change any single element: the level of the vocal, the EQ on the kick, the reverb on a synth. Once you bounce the mix to one stereo file, every move you make affects everything at once. That is why mastering moves are usually small, and why problems with individual instruments are best fixed back in the mix. iZotope's mastering guide puts it simply: create a mix that already sounds the best it can, rather than expecting mastering to fix it later. If the vocal is the part that needs work, our guide on how to mix vocals covers the EQ, compression and automation steps that belong in the mix.
If you are searching for how to mix and master a song yourself, treat them as two separate sessions. Finish and bounce the mix, take a break, then start mastering with fresh ears. If your project is a remix, finish the arrangement and sound choices first; our beginner remix tutorial covers that part of the workflow.
Step 1: Prepare the mix for mastering
- Leave headroom. Nothing should clip on any channel or on the master bus. iZotope suggests keeping the mix's maximum peak below roughly -3 to -6 dBFS, with an average level around -18 dBFS RMS. These are guidelines, not rules; the point is to avoid clipping.
- Take the limiter off the mix bus. If you have been mixing into a limiter to hear the track loud, bypass it before you bounce, so mastering starts from the unlimited mix.
- Check the start and the end. Make sure the first transient is not cut off and that reverb and delay tails decay fully before the file ends.
- Bounce a lossless file. Export a stereo WAV or AIFF at the same sample rate and bit depth you recorded with, for example 24-bit at 48 kHz.
Step 2: Set up the session and pick a reference track
Import the stereo mix into a new session, on its own track. Then import one or two professionally released songs in the same genre as reference tracks. A reference shows you how your song's tone, width and loudness compare with music your listeners already know. When you compare, turn the reference down so both play at a similar perceived loudness; a louder track almost always sounds "better" at first, which can mislead you.
Step 3: Listen first and write a to-do list
Before adding any processing, listen to the whole song once, top to bottom, and write down what you hear. Useful questions:
- Is the low end too heavy or too thin? Is the top end harsh or dull?
- Do the drums feel punchy, or do they poke out above everything else?
- Do the chorus or drop hit harder than the verse or build-up?
- Is the lead vocal or lead instrument clear?
- Does the song feel too narrow or too wide? Are there clicks, hums or harsh resonances?
That list becomes your plan. The general rule in mastering is to make corrections first and enhancements second, and to use as few tools as the song actually needs. Some songs only need a small EQ dip and a limiter.
Step 4: Put a limiter at the end of the chain
It sounds backwards, but it helps to set up the limiter early, even though it sits last in the chain. A limiter is a compressor with an extreme (brick-wall) ratio: it raises the overall level of the song while stopping peaks from going over the ceiling you set. Because we hear tone differently at different volumes, working with the limiter in place lets you judge EQ and compression at roughly the final loudness.
- Set the limiter's output ceiling a little below 0 dBFS. iZotope suggests somewhere between -1.0 and -0.3 dBFS as a starting point.
- Raise the input gain (or lower the threshold) until the limiter shows about 2 to 3 dB of gain reduction on the loudest parts.
- Switch on true-peak limiting if your limiter has it, or check the result on a true-peak meter. Peaks between samples can exceed the ceiling slightly, and the master should not go over 0 dBFS.
You will come back to this limiter at the end to fine-tune the level.
Step 5: Correct the tone with EQ
Use an equalizer to fix the tonal problems on your list. Work with gentle, broad moves: a dB or two is often enough on a full mix. Common fixes include a small cut in the low mids when the mix sounds muddy or boxy, a narrow cut on a harsh resonance in the upper mids, and a gentle high shelf when the top end feels dull or too bright. Switch to your reference regularly; after a while your ears get used to the sound in front of them, and the reference resets your perspective. Aim for a balance similar to the reference, not an exact copy of its curve.
If one element of the mix is clearly wrong, for example a vocal that is too quiet or a kick that is too loud, go back to the mix if you can. When the mix session is not available, some mastering suites now use source separation to adjust vocals, bass and drums inside a stereo file; our article on AI audio production tools explains how that technology works. A kick and bass that keep masking each other are also a mix job; sidechain compression is the usual fix.
Step 6: Glue the mix with compression
A compressor on the master can make the mix feel more cohesive (often called "glue"), add punch to transients, or bring out the groove. On a full mix, settings are usually gentle: a low ratio and only a dB or two of gain reduction on the loudest hits. Listen carefully to the attack time. A fast attack tames peaks but can flatten the drums, while a slower attack lets transients through and keeps the punch. If compression starts to make the mix sound smaller or the drums duller, back it off. Compression is optional; skip it if the mix already feels consistent.
Step 7: Check the stereo image and mono compatibility
A stereo imager can widen a mix that feels narrow or narrow parts that are too wide, such as a bass that has spread across the stereo field. Use it sparingly. Widening can introduce phase problems that make the song sound thin or hollow when it is played in mono, which still happens on many phone speakers, smart speakers and club systems. Watch a correlation meter while you adjust, and switch the master to mono now and then to make sure the kick, bass and lead vocal stay solid.
Step 8: Set the final loudness
Return to the limiter and set the final level. Two things matter here: how loud the song sounds next to others in its genre, and how streaming services will play it back.
Spotify, for example, normalizes playback to -14 dB LUFS integrated, measured according to the ITU 1770 standard. A louder master is simply turned down during playback, and a quieter one is turned up only as far as its peak headroom allows. Spotify's own mastering tips for artists are:
- Target an integrated loudness of about -14 LUFS.
- Keep the true peak below -1 dBTP, which helps avoid extra distortion when the file is encoded to lossy formats.
- If the master is louder than -14 LUFS, keep the true peak below -2 dBTP.
Many genres are mastered louder than that. iZotope lists -12 to -8 LUFS as typical for pop, rock and EDM, and around -18 LUFS for some folk, acoustic and classical releases. A practical approach is to make the song as loud as you can before the limiting starts to dull the transients or flatten the dynamics. To check, match the level of the limited and unlimited versions and switch between them; if you would not be happy with the change, back off the gain.
Step 9: Export the master
- Trim silence at the start and end and add any fades.
- Export the main master as a lossless WAV or AIFF, at the sample rate you mastered at and 24-bit. Some distributors still ask for 16-bit, 44.1 kHz files, so check your distributor's requirements.
- Apply dither only when you reduce bit depth, for example from a 32-bit floating-point session to a 24-bit or 16-bit file. Dither once, as the very last step.
- If you also need an MP3 or AAC for promotion, iZotope recommends at least 256 kbps, ideally 320 kbps.
Finally, listen to the exported file on several systems you know well: headphones, a car stereo, a phone. Do your critical mastering decisions on the most accurate, full-range speakers you have, and use the other systems as a check.
How to master a song in FL Studio, GarageBand or Ableton Live
The steps above work in any digital audio workstation (DAW). You can do all of them with the plug-ins that come with the program:
- FL Studio. Route the song to the Master mixer track and load Fruity Parametric EQ 2 for tone, then Fruity Limiter, which also works as a compressor, at the end of the chain. Maximus, the multiband dynamics plug-in included in some FL Studio editions, can also handle the final limiting.
- GarageBand. Show the master track (on the Mac this is in the Track menu) and add an EQ and a compressor to it. Keep the moves gentle, and watch the master meter so the output never clips.
- Ableton Live. On the Main track, a simple chain is EQ Eight for tone, Glue Compressor for gentle bus compression, and Limiter last. Utility's Mono switch is a quick way to check mono compatibility.
Whichever DAW you use, insert the effects on the master or main output, bypass them now and then to compare against the untreated mix, and level-match while you compare.
Common mastering mistakes
- Fixing mix problems in the master. If one instrument is the problem, change it in the mix.
- Judging changes by volume. Louder sounds better at first. Level-match before and after every move.
- Over-limiting. Pushing the limiter too hard flattens transients and, on streaming services, the extra loudness is often turned down anyway.
- Too much widening. A wide master that collapses in mono will lose its punch on many playback systems.
- Exporting a lossy file as the master. Keep a lossless master and make MP3 or AAC versions from it.
Frequently asked questions
How do you master a song at home for free? Use the stock EQ, compressor and limiter in your DAW, follow the order above, and compare against a reference track at matched loudness. Expensive plug-ins can speed things up, but they do not replace careful listening.
How loud should my master be? For streaming, Spotify recommends about -14 LUFS integrated with true peaks below -1 dBTP. Many pop, rock and electronic releases are louder; the right level is the loudest one that does not cost the song its punch.
What is the first step in mastering a song? Preparing the mix: no clipping, enough headroom and a lossless bounce. Once processing starts, many engineers set up the limiter first so they can judge EQ at the final level.
How long does it take to master a song? It varies. iZotope notes that an experienced engineer can master a straightforward song in around 15 minutes, while someone newer to it might spend a few hours. Both are normal.
Conclusion
To master a song, start from a clean mix with headroom, listen and write down what needs to change, then work in order: limiter in place, corrective EQ, gentle compression, careful stereo adjustments and a final loudness that suits your genre and streaming playback. Compare against a reference at matched loudness at every step, export a lossless master, and check it on the systems your listeners use.
This guide describes common mastering practice. There is no single correct signal chain, and every song needs a different amount of processing. Always check your distributor's current delivery specifications before release.
Sources
- iZotope (Ian Stewart), "How to master a song from start to finish with Ozone": https://www.izotope.com/community/blog/how-to-master-a-song-from-start-to-finish (read 2026-11-18; mixing vs mastering, mix headroom -3 to -6 dBFS peak and about -18 dBFS RMS, bounce at recorded bit depth/sample rate, references, listen and take notes, corrections before enhancements, limiter ceiling -1.0 to -0.3 dBFS with 2-3 dB gain reduction, true peak, compression for glue/punch, stereo imaging and mono compatibility, genre loudness table, export 24-bit lossless with dither only on bit-depth reduction, 256-320 kbps lossy, mastering time)
- Spotify for Artists, "Loudness normalization on Spotify": https://support.spotify.com/us/artists/article/loudness-normalization/ (read 2026-11-18; playback normalized to -14 dB LUFS per ITU 1770, positive gain limited by headroom, mastering tips: -14 LUFS integrated, true peak below -1 dBTP, below -2 dBTP for masters louder than -14 LUFS)
